• 6

6" x 4" Two Side Moulder Planer

SM-152A

Price/ea
$21,990.00
Back

Features:

  • Feed speeds ranging from 20' ~ 98' per minute is a standard feature; faster feed speeds up to 120 feet per minute are available.
  • The full safely enclosure cover as chips guard and helps to reduce noises.
  • Table surface is hard-chrome plated for maximum wear resistance.
  • All manually adjusted turning parts are housed in dry bearings for oil-free lubrication.
  • One-piece, cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity.
  • The smooth initial feeding of the stock is achieved by the independently powered infeed rollers.
  • All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy.
  • Standard spindle speed is 8,000 RPM. Higher spindle speeds are available upon request.
  • Fence adjusted is quickly accomplished by a quick-setting lever.
  • The independent section pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect.
  • The entire motion controls of the machine are centralized on the control panel for convenient operations.
  • All control levers for the spindles are located at the front of the machine for convenient adjustment.
  • Each spindle is provided with a mechanical digital read out, providing accurate adjustment.
  • The front pressure plate features draw-back performance which fully avoids damage on cutters caused by an over-height workpiece.
  • The rear pressure plate provides extremely uniform molding pressure for outstanding parallelism accuracy of machining.
  • An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high speed running.
  • The roller in the infeed table is powered, providing a smooth feeding effect for the tough stock.
  • The spindles are lubricated by the centralized lubrication system for convenience.

SM-AOFEED

AUTO FEED HOPPER, MAGAZINE $8,900.00

DC-AUTO

AUTO DIGITAL THICKNESS CONTROL $1,990.00

SM-KFST

KNIFE CALIBRATE SETUP STAND $1,790.00

Specification:

PECIFICATIONS SM-152A SM-155A SM-156A SM-205A
Max. (Min.) Working Width 6" (3/4") 6" (3/4") 6" (3/4") 8" (3/4")
Max. (Min.) Working Thickness 4-3/4" (5/16") 4-3/4" (5/16") 4-3/4" (5/16") 4-3/4" (5/16")
Min. Working Length 9½" 9½" 9½" 9½"
1st Spindle Horsepower 5½ HP 7½ HP 7½ HP 7½ HP
2nd, 3rd Spindle Horsepower ~ 5½, 5½HP 5½, 5½HP 7½,7½ HP
4th, 5th, 6th Spindle Horsepower 7½, ~, ~ HP 10, 7½, ~ HP 10, 7½, 7½ HP 15, 10, ~ HP
Feed Motor 3 HP 3 HP 4 HP 5½ HP
Elevation 1/2 HP 1/2 HP 1 HP 1 HP
Spindle Diameter 40 MM 40 MM 40 MM 40 MM
Cutter Speeds (RPM) 6500 6500 6500 6500
Variable Feed Speeds (FPM) 16 ~ 66 16 ~ 66 17 ~ 66 16 ~ 82
Cutterhead Diameter
1st Bottom Head 5" 5" 5" 5"
2nd, 3rd Vertical Head 5" ~ 6-1/4" 5" ~ 6-1/4" 5" ~ 6-1/4" 5" ~ 6-1/4"
4th ~ 6th Head 5" ~ 7" 5" ~ 7" 5" ~ 7" 5" ~ 7"
Pneumatic Air 90 PSI (CFM)  5 5 5 5
Dust Outlet Diameter 5" x 2 5" x 5 5" x 6 5" x 5
N.W. (LBS) 4900 5850 6400 7200
G.W. (LBS) 5860 6700 7200 8100

Related Products